Certmanager on Build. Run. Repeat.

HashiCorp Vault Enterprise - Performance Replication on Kubernetes

Wed, 01 Jan 2025 09:00:00 -0400

This blog post dives into the technical implementation of Vault Enterprise replication within a Kubernetes environment. We’ll explore how to set up performance and disaster recovery replication, overcome common challenges, and ensure smooth synchronization between clusters. Whether you’re aiming for redundancy or better data locality, this guide will equip you with the insights and tools needed to leverage Vault’s enterprise-grade features in Kubernetes effectively.

Architecture

Prerequisites

2 Kubernetes clusters. *Note: for simulation purposes, you can also use a single Kubernetes cluster with multiple namespaces to host both Vault clusters.
Helm installed
kubectl installed
Vault CLI installed
jq installed
Vault Enterprise license

Note: for this implementation LoadBalancer services are used on Kubernetes to expose the Vault services (the API/UI and the cluster address for replication). It is highly recommended to use a LoadBalancer rather than ingress to expose the cluster address for replication. Vault itself performs the TLS termination as the TLS certificates are mounted to the Vault pods from Kubernetes. Additionally, note that when enabling the replication, the primary cluster points to the secondary cluster address (port 8201) and not the API/UI address (port 8200). When the secondary cluster applies the replication token, however, it points to the API/UI address (port 8200) to unwrap it and compelete the setup of the replication. We will see this in more detail in the implementation section.

Harbor Registry - Automating LDAP/S Configuration - Part 1

Fri, 01 Nov 2024 09:00:00 -0400

The Harbor Registry is involved in many of my Kubernetes implementations in the field, and in almost every implementation I am asked about the options to configure LDAP/S authentication for the registry. Unfortuntely, neither the community Helm chart nor the Tanzu Harbor package provides native inputs for this setup. Fortunately, the Harbor REST API enables LDAP configuration programmatically. Automating this process ensures consistency across environments, faster deployments, and reduced chances of human error.

Fixing Missing TKRs in Existing TKGS Deployments

Wed, 01 May 2024 09:00:00 -0400

I regularly check the Tanzu Kubernetes Releases (TKR) release notes page for new updates. Yesterday, a new TKR was released with support for Kubernetes 1.28.8, and while attempting to test this new version in my TKGS environment, I realized that the TKR was not present in my environment and I started wondering why, as normally, when new TKRs are released, they immediately become available for deployment, since the vCenter is subscribed to the VMware public content library where all the TKRs are hosted. This time, that was not the case, so I started investigating.

HashiCorp Vault Intermediate CA Setup with Cert-Manager and Microsoft Root CA

Mon, 01 Jan 2024 09:00:00 -0400

In this post, we’ll explore how to set up HashiCorp Vault as an Intermediate Certificate Authority (CA) on a Kubernetes cluster, using a Microsoft CA as the Root CA. We’ll then integrate this setup with cert-manager, a powerful Kubernetes add-on for automating the management and issuance of TLS certificates.

The following is an architecture diagram for the use case I’ve built.

A Microsoft Windows server is used as the Root CA of the environment.
A Kubernetes cluster hosting shared/common services, including HashiCorp Vault. This is a cluster that can serve many other purposes/solutions, consumed by other clusters. The Vault server is deployed on this cluster and serves as an intermediate CA server, under the Microsoft Root CA server.
A second Kubernetes cluster hosting the application(s). Cert-Manager is deployed on this cluster, integrated with Vault, and handles the management and issuance of TLS certificates against Vault using the ClusterIssuer resource. A web application, exposed via ingress, is running on this cluster. The ingress resource consumes its TLS certificate from Vault.

Prerequisites

Atleast one running Kubernetes cluster. To follow along, you will need two Kubernetes clusters, one serving as the shared services cluster and the other as the workload/application cluster.
Access to a Microsoft Root Certificate Authority (CA).
The Helm CLI installed.
Clone my GitHub repository. This repository contains all involved manifests, files and configurations needed.

Setting Up HashiCorp Vault as Intermediate CA

Deploy Initialize and Configure Vault

Install the Vault CLI. In the following example, Linux Ubuntu is used. If you are using a different operating system, refer to these instructions.

Using HashiCorp Vault as Ingress TLS Certificate Issuer in TAP

Mon, 01 Jan 2024 09:00:00 -0400

Using HashiCorp Vault as Ingress TLS Certificate Issuer in TAP

Tanzu Application Platform (TAP) uses Contour HTTPProxy resources to expose several web components externally via ingress. Some of these components include the API Auto Registration, API Portal, Application Live View, Metadata Store, and TAP GUI. Web workloads deployed through TAP also leverage the same method for their ingress resources. For example:

$ kubectl get httpproxy -A

NAMESPACE NAME FQDN TLS SECRET STATUS STATUS DESCRIPTION
api-auto-registration api-auto-registration-controller api-auto-registration.tap.cloudnativeapps.cloud api-auto-registration-cert valid Valid HTTPProxy
api-portal api-portal api-portal.tap.cloudnativeapps.cloud api-portal-tls-cert valid Valid HTTPProxy
app-live-view appliveview appliveview.tap.cloudnativeapps.cloud appliveview-cert valid Valid HTTPProxy
metadata-store amr-cloudevent-handler-ingress amr-cloudevent-handler.tap.cloudnativeapps.cloud amr-cloudevent-handler-ingress-cert valid Valid HTTPProxy
metadata-store amr-graphql-ingress amr-graphql.tap.cloudnativeapps.cloud amr-ingress-cert valid Valid HTTPProxy
metadata-store metadata-store-ingress metadata-store.tap.cloudnativeapps.cloud ingress-cert valid Valid HTTPProxy
tap-demo-01 spring-petclinic-contour-76691bbb1936a7b010ca900ce58a3f57spring spring-petclinic.tap-demo-01.svc.cluster.local valid Valid HTTPProxy
tap-demo-01 spring-petclinic-contour-88f827fbdc09abbb4ee2b887bba100edspring spring-petclinic.tap-demo-01.tap.cloudnativeapps.cloud tap-demo-01/route-a4b7b2c7-0a56-48b9-ad26-6b0e06ca1925 valid Valid HTTPProxy
tap-demo-01 spring-petclinic-contour-spring-petclinic.tap-demo-01 spring-petclinic.tap-demo-01 valid Valid HTTPProxy
tap-demo-01 spring-petclinic-contour-spring-petclinic.tap-demo-01.svc spring-petclinic.tap-demo-01.svc valid Valid HTTPProxy
tap-gui tap-gui tap-gui.tap.cloudnativeapps.cloud tap-gui-cert valid Valid HTTPProxy

TAP uses a shared ingress issuer as a centralized certificate authority representation, providing a method to set up TLS for the entire platform. All participating components get their ingress certificates issued by it. This is the recommended best practice for issuing ingress certificates on the platform.

TKG: Updating Pinniped Configuration and Addressing Common Issues

Thu, 01 Jun 2023 09:00:00 -0400

Most of the TKG engagements I’ve been involved in included Pinniped for Kubernetes authentication. On many occasions, I have seen issues where the configuration provided to Pinniped was incorrect or partially incorrect. For example, common issues may be related to the LDAPS integration. Many environments I have seen utilize Active Directory as the authentication source, and Pinniped requires the LDAPS certificate, username, and password, which are often specified incorrectly. Since this configuration is not validated during the deployment, you end up with an invalid state of Pinniped on your management cluster.

Tanzu Kubernetes Grid GPU Integration

Wed, 01 Mar 2023 09:00:00 -0400

I recently had to demonstrate Tanzu Kubernetes Grid and its GPU integration capabilities. Developing a good use case and assembling the demo required some preliminary research.

During my research, I reached out to Jay Vyas, staff engineer at VMware, SIG Windows lead for Kubernetes, a Kubernetes legend, and an awesome guy in general. :) For those who don’t know Jay, he is also one of the authors of the fantastic book Core Kubernetes (look it up!).

Getting Started with Carvel ytt - Real-World Examples

Sun, 01 Jan 2023 09:00:00 -0400

Over the years of working with Tanzu Kubernetes Grid (TKG), one tool has stood out as a game-changer for resource customization: Carvel’s ytt. Whether tailoring cluster manifests, customizing TKG packages, or addressing unique deployment requirements, ytt has consistently been a fundamental part of the workflow. Its flexibility, power, and declarative approach make it an essential tool for anyone working deeply with Kubernetes in a TKG ecosystem.

But what exactly is ytt? Short for YAML Templating Tool, ytt is part of the Carvel suite of tools designed for Kubernetes resource management. It provides a powerful, programmable approach to templating YAML configurations by combining straightforward data values, overlays, and scripting capabilities. Unlike many traditional templating tools, ytt prioritizes structure and intent, making it easier to maintain, validate, and debug configurations—particularly in complex, large-scale Kubernetes environments.

Replacing your vCenter server certificate? TKG needs to know about it…

Sun, 01 Jan 2023 09:00:00 -0400

I recently ran into an issue where TKGm had suddenly failed to connect to the vCenter server.

The issue turned out to be TLS-related, and I noticed that the vCenter server certificate had been replaced…

Due to the certificate issue, Cluster API components failed to communicate with vSphere, causing cluster reconciliation to fail, among other vSphere-related operations.

Since all TKG clusters in the environment were deployed with the VSPHERE_TLS_THUMBPRINT parameter specified, replacing the vCenter certificate breaks the connection to vSphere, as the TLS thumbprint changes as well.

Upgrading NSX ALB in a TKG Environment

Thu, 01 Sep 2022 09:00:00 -0400

For quite a long time, the highest version of the NSX ALB TKG supported was 20.1.6/20.1.3, although 21.1.x has been available for a while, and I have been wondering when TKG would support it. In the release notes of TKG 1.5.4, I recently noticed a note that has been added regarding NSX ALB 21.1.x under the Configuration variables section:

AVI_CONTROLLER_VERSION sets the NSX Advanced Load Balancer (ALB) version for NSX ALB v21.1.x deployments in Tanzu Kubernetes Grid.

Customizing Elasticsearch indices using Fluent-Bit in TKG